Nowadays, almost all the households require some sort of airconditioning and most often they for the split airconditioner that is ductless. It’s a compact system which is quite energy efficient as well as low on cost that they are mostly pre-installed in the new homes. These devices tend to be small and hence cleaning these may prove to be daunting at times. To add to the problem, if you opt for professional cleaning then it can turn out to be quite costly and you may have to pay around 25-35 percent of new system’s cost. So, here are some DIY instructions that will allow you to clean your air conditioning system on your own and get that strong and cool airflow back.
When you are going to clean your split airconditioner, you will have to start with buying a wash bag. You can buy these custom bags online and they have been designed for catching any waste water which accumulates as soon as your unit is cleaned. Another thing that you will need is some reasonable coil cleaner. Make sure not to use the coil cleaners that are foam type as they can result in mess and spread the foam everywhere. The foam sprays might not be able to penetrate in blades of rotor fan and coils properly as well. Hence it is advisable that you should stick to the liquid sprays only.
When you are going to clean your airconditioner, make sure not to go for chemical cleaners that have a harsh effect and have been designed for attacking the organics. The reason is that they may be a source of damaging your new system.
Once you have everything in place, install wash bag that you bought around your split unit on wall. This allows you not to tear your system down similar to the professionals. Now spray chemical solution on coils of your airconditioner. Try spraying at some angle on the surface of cooling fins and directly into coils. Ensure that solution reaches as far as possible into coils. A good idea would be putting some nozzle closer to the fins. Now spray rotary blades that are hidden in airflow’s outlet. For getting good results, you’ll have to make use of an extensive spray nozzle. Ensure that all the blades are coated with cleaning solution.
Once cleaning solution has been, wait for 10-20 minutes allowing it to work. Now flush rotary blades and coil with some water sprayer. Check out that all grime and dirt flows into wash bag that you had used earlier. Some water will also flow out through drain pipe of your airconditioner. The coil unit should now be wiped down. Turn the unit on and lift bag’s front up for allowing all rinse water getting sprayed in the bag. Wash bag should now be removed from its ends with proper care and the waste water should be dumped. Get completely satisfied that the unit has been properly cleaned out and there is no risk of its malfunctioning.
Cleaning an airconditioner is not really a daunting task and can be done easily with some basic steps to be followed. An online airconditioning service provider can also turn out to be a handy choice in this regard.