The maintenance and inspection of height safety equipment such as those for fall protection is a fundamental component of safety when working at heights in Australia.
The maintenance and inspection of height safety equipment such as those for fall protection is a fundamental component of safety when working at heights in Australia. Workers surely need to follow some simple steps as a component of their routine to make sure that lanyards and harnesses provide optimal protection.
- All lanyards, as well as harnesses, have to be fully inspected before they are used. Users have to check and make sure that all harness serial numbers, labels, as well as inspection and withdrawal dates are all legible. Also, it is really crucial that users should check that the mark of safety standard certification is clearly visible on the lanyard or harness.
- Inspect the webbing of the lanyard as well as the harness for any tears, excessive stretching, cuts, holes, or even abrasive damage. Depending on the industry that is involved, harnesses can end up being exposed to corrosives, heat, and even varying hardware, which could end up compromising the webbing’s integrity.
- Examine all of the lanyard as well as harness hardware and check to see whether there is any deformation, corrosion, or even excessive movement. D-rings, buckle adjuster, as well as snap hooks, should all be free from damage as well as dirt. If any of the varying hardware happens to show excessive wear and tear – make sure that you have it replaced immediately. This is among the basic steps that will prevent you from needing the services of a height safety equipment inspector or agency in Australia.
- All ropes have to be checked thoroughly for abrasions, cuts or fraying as well as broken or cracked thimbles. If there is any damage to the rope that is visible, take the rope out of active service and then document the elimination.
- Check all of the sewing that is on the lanyard and harness to make sure that there aren’t any cuts, broken or worn threads. Also, it is quite crucial that you look out for just any kind of weakened or damaged threads due to the damage that has occurred via deterioration or exposure. If there any unauthorised repairs that happen to be visible, make sure that you take the equipment out of active service instantly.
In addition to prolonging its durable life, basic care of all safety equipment also contributes to the performance of the equipment’s vital safety functions. Proper maintenance and storage after every use are just as crucial as having the equipment cleaned of corrosives, dirt, as well as contaminants. The effective means of getting a lanyard or harness thoroughly cleaned is by first having the surface wiped with a sponge that is damp, before working lather up by using a mild solution of dishwashing liquid together with water. The equipment should then be rinsed in water that is lukewarm, and hanged freely out of excessive heat, to dry.
These are the simplest steps for the inspection and maintenance of height safety equipment in Australia including the ones for fall prevention. Building a culture of safety that is enduring can turn out to be the most proven and cost-effective process for the effective prevention of work-related accidents. So, why don’t you use these steps to create your own culture?