When working at heightsin Australia, you need roof anchor points. Working at heights has a lot of risks. If you are required to work at heights then you need to have anchor points to prevent fall fatalities.
When working at heightsin Australia, you need roof anchor points. Working at heights has a lot of risks. If you are required to work at heights then you need to have anchor points to prevent fall fatalities. Workers in Australia are entitled to work in a safe environment. If you are a business owner and you let your employees work at a height without anchor points, you will be criminally liable because your safety systems will not be compliant. Unfortunately, choosing anchor points is not as easy as it sounds. Not all anchor points are created equal and you shouldn’t take anchor point selection lightly.
What is an anchor point?
Anchor points are used in tandem with other working at height safety equipment such as lanyard or harness fall protection systems. You can find both temporary and permanent anchor points. When anchor points are installed correctly, they protect employees working at height from fall hazards.
Things to consider when choosing anchor points
When choosing anchor pointsin Australia, you need to consider the type of forces they are supposed to withstand. You should also consider the type of anchor points that your lanyard can connect to. Another thing you need to consider when choosing anchor points is the type of preparation work needed. Make sure you know the part of the roof you are supposed to attach your anchor point before choosing an anchor point. If you don’t know roof anchor points standards, you can consult a professional.
Different types of anchor points
The type of anchor points you choose in Australia will depend on the purpose of use. Fall arrest systems are designed for when an employee free-falls through space. The fall arrest system catches them mid-air and prevents fatal injuries because there is no impact at a lower level.
The second type of anchor point is the rope access system which is designed to protect falls where conventional methods cannot work. Rope access systems allow workers to ascent, descent and traverse ropes while suspended by a work seat or harness.
How to choose the right anchor point
When choosing the right anchor pointin Australia, you should remember that wood should be engineer-certified, steel members are preferable, anchor bolts are supposed to be inspected by a professional, plate washers and through bolts are also supposed to be inspected by a professional too, equipment including turnbuckles, eyebolts, beam clamps and concrete embeds may be used together with anchor points. Anchor points should be carefully evaluated and inspected for load-bearing capacity. It is crucial to take note of unsuitable products and avoid them.
When choosing roof anchor points, it is crucial to ensure that the anchor points meet the standards. You need to think about whether the products have energy-absorbing properties. This will be excellent especially if you need something flexible enough for use on commercial, domestic and industrial construction. You need to work with professionals so that they can inspect your premises, recommend and install height safety equipment that is compliant to the regulations.